RC10B4.1 FT/WC
12-14-2011 | 12:46 PM
#8495
Tech Legend
Joined: Aug 2001
Posts: 22,595
From: TRCR Modified Driver
Nice video from Trackside, but I have a question. I am in the process of switching mine over to the new chassis and was wondering if plastic parts are still being used on tracks with less grip. I see most people are using the carbon parts but the track I race at I would consider a slick track that gets watered between every round. Usually a little cold out on the track as well. Silt dirt with very little clay. Racing line is generally clean and usually a little damp. What should I try first?
Suggest using the graphite nose plate & ft arms , makes the car more consistent and easier to drive fast .
Most use graphite rear arms as well , but some also use plastic if more traction is desired...
12-14-2011 | 01:12 PM
#8496
Tech Master
iTrader: (120)
Joined: Apr 2011
Posts: 1,076
From: SoCal - Chillin in the LBC
It fits. Just short on the nose a touch. I got the AE 8mm chassis and am using my stock Proline Bulldog B4.1 body and can't even tell. No need to buy a 8mm specific body. Hell what is 8mm anyway...as far a body fitment.
12-14-2011 | 01:14 PM
#8497
AE +8mm ..
12-14-2011 | 03:58 PM
#8504
Joined: Jan 2003
Posts: 8,616
From: New Jersey
I could run Masami's body, it ain't helping me not suck.
12-14-2011 | 04:04 PM
#8505
Tech Master
Joined: Feb 2006
Posts: 1,480
From: Las Vegas, NV
There is one body that doesn't fit, the AE B4.1 body. Not the one you get in the FT kit, but the one you get with the RTR (you can also get it clear). That body doesn't fit at all.