Go Back  R/C Tech Forums > General Forums > Radio and Electronics
M11 or MMM issue- need help >

M11 or MMM issue- need help

Community
Wiki Posts
Search

M11 or MMM issue- need help

Thread Tools
 
Search this Thread
 
Old 12-13-2011 | 06:51 PM
  #1  
Titian2010's Avatar
Thread Starter
Tech Master
iTrader: (73)
 
Joined: Oct 2010
Posts: 1,925
From: Socal Ca 909
Default M11 or MMM issue- need help

Just got this used m11 and it's a headache! First the Rx was blown and now my range is supper low. When the sc truck gets 2-3 car lengths away it stops and I get no steering or throttle. As I walk closer the MMM re-sets then the sc works till it gets a few feet away. Havent owned a m11 so I'm not sure of the ranges with low or high batter volts. The first set of AA batteries said 9.1 and it was beeping to let me know that's too low. Then I put my back up batteries semi new and it said 10.5. The first set gave me no distance and the second gave me a tad further. No sure if the MMM is going out because of the re setting or if I have a faulty radio or Rx. Don't want to invest into a m11 lipo until im sure it's ok. Using a dsss module and Rx now and i have a spektrum module on the way. Hope that fixes the issue but if not what else should I try? Not gonna try it on my nitro because last thing I need right now is a run away buggy. Any suggestions? Thanks
Titian2010 is offline  
Old 12-13-2011 | 07:12 PM
  #2  
Tech Master
iTrader: (3)
 
Joined: Jul 2008
Posts: 1,465
From: Melbourne, Australia
Default

What servo are you running ?

Watch the receiver and turn the servo fast to full lock a couple of times

If the receiver drops out (brownout) then you may have a bec related issue

Easily fixed with a glitch buster capacitor or an external bec

Cheers
crusey_aus is offline  
Old 12-13-2011 | 07:21 PM
  #3  
Titian2010's Avatar
Thread Starter
Tech Master
iTrader: (73)
 
Joined: Oct 2010
Posts: 1,925
From: Socal Ca 909
Default

I run Savox hvs on everything and thought that was the issue and tried my hitec spare and it's the same issue.
Just did another test and it's not the MMM. Plugged a hump pack and servo into a Rx out of the Rc. Works great when I'm near. When I walk away my wife says the light(led) flickers then goes out and servos stops. As I come closer the light flickers back on. So I'm guessing the module or radio.
Titian2010 is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.