R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 11-14-2011 | 08:26 PM
  #10912  
kghills's Avatar
kghills
Tech Master
iTrader: (40)
 
Joined: Dec 2008
Posts: 1,475
From: Brooklyn, WI
Default

Originally Posted by MantisWorx
no, its the same setup i normally run except the ackerman setting were all the way back, that is not going to make up nearly a second in time. the truck feels much more planted and stable most noticeabley under exit acceleration and post jump. corner speed is greatly increased due to the CG in my opinion. no i dont think the chassis is 100% effective but at least 90% in my case. none of the other changes will give that big of a time difference. i had to raise the ride height up slightly due to the weight but i made no other setup changes to compensate for the chassis, just to see what it would be like. i usually run yellow springs but changed saturday (why i dont know!) the ACKbar makes a driving difference but a tenth or two at the most as it makes it more comfy to push hard. I have a lot of wheel time and am pretty good at being able to tell what changes effect the truck.
Thank you Marcus, I appreciate the feedback. I will get it saddled up.

Keith.
kghills is offline