Originally Posted by
mcdanielbro's
Quick questin for u guys...
My truck, on high speed straits comin into a 90 degree turn per say, the rear of the truck is loose, off the throtal, it will sometimes spin out it comes around so quick, and u can't get back in the throtal fast enuff to pull it out. What can I do to tightin up the back end?
My setup now:
27.5 rear 32.5 front shock oils,stock springs
5k rear 20k front diff oils
3-3 rear toe block
1 degree camber all the way around
Front is overdrivin
Slipper and clicker is locked down
Enduro's all around
Any tips?
all in the diffs. two was you can go for off power rear grip first is to go lighter in the front witch you will have more turn off power. use this if you on a vary tight track should make the front out turn the back.
next if you go thicker in the rear it make it less responsive off power witch is good on most out door track/slippery. i think you would like 7-10k on rear diff might make you truck want to flip more so try more camber if it dose.(if on tight high grip track lower the front to 10k)