R/C Tech Forums - View Single Post - MTX 5
Thread: MTX 5
View Single Post
Old 11-10-2011 | 10:50 PM
  #1379  
postopitcrew's Avatar
postopitcrew
Tech Master
iTrader: (2)
 
Joined: Jul 2009
Posts: 1,436
From: Mizan Hobby Malaysia
Default

Originally Posted by jaykay
I used the standard springs, with 500 oil, 3 degree toe in in the rear and i have no accelerator function.

i also tried softer springs in the front, but the effect was not much better. i also changed the front roll-center but was not really better.

diff oil i used 200.000 front, 80.000 rear
ok..my suggestion you should try this setting;

1.use all 1.6 purple spring front and rear
2.use 400-450 shock oil
3.try two hole shock piston in front suspension (same with the rear)
4.make 1.5mm down stop at front,the rear is 0mm which is like free play
5.front roll bar make it flat to end
6.upper arm position is all down,if your car have a little bit shaky,change to center hole.
7.all purple spring make sure it's free roll(you can play cw and ccw) means not to tied end to end
8.rear toe is ok for 3 degree in,but your car become slow in high speed line,better in and out tied corner.front toe try 1.5 out

your diff is ok if your are aggressive driving style.

best regds.

Last edited by postopitcrew; 11-10-2011 at 11:11 PM.
postopitcrew is offline