R/C Tech Forums - View Single Post - Serpent 811E Buggy Thread
View Single Post
Old 10-26-2011 | 07:42 AM
  #459  
Frank L's Avatar
Frank L
Tech Lord
iTrader: (148)
 
Joined: Dec 2008
Posts: 12,520
From: NorCal
Default

Originally Posted by Maxxingout
So what servo's are people running/recommending to run in this snake? Also for those that already have them, can you share what weight oils you started out with all the way around, did you start with the factory settings?
For steering servo it's hard to beat the savox 1268's they don't break the bank and they perform great. My favorite servo is the KO rsx line. They are definatly at the top but they do stress the bank a little.

For fluids I started with the same as I run inthe nitro buggy 40 front and 30 rear with 5-5-4. After running the car I would bump the center fluid up to at least 7 as the front just unloads and turns the front tires into pizza cutters immediately when you pull the trigger hard. So prob 5-7-3 and 40/30 in the shocks with 1.3 pistons and maybe go up to 5-10-3 if the front still unloads.
Frank L is offline