Originally Posted by
bmsgangster
b4.1 is pushing, I have tried everything, orange kyosho springs front, black kyosho rear, short front link no spacers, rear link 1 spacer, 1deg camber front, .5 back, 3 deg toe in center w/.5 hubs, 2deg anti squat, 32.5 w/#2pistions front, 30w #2p rear. upper shocks all the way to inside, lower front outside, rear inside. 3 internal shock limiters front , 2 rear, m4 scrubs aka foams(red) front JC rips 1/4 oz in front, 17G FT lipo block with 3/4 oz across the backside of the battery 1/4 oz on the rear triangles
track is indoor, wet clay/ dust, smooth/bumpy med traction
WHY IS MY CAR PUSHING, it will push high speed entering corners slow speed tight corners...
thanks!
Lengthen the front camber link. add a washer or two under the ballstud.
Reduce the limiting on the front. 3 limiters on the outside holes of the arm probably leave you little to no droop. (you can just unscrew your shock ends to play with that before taking the shock apart to change the limiting).
And change the front oil to match the rear at 30wt.