I did ensure that the sensor wire was fully in both my tc spec v2. and motor. I just replaced the motor with the same motor and am still having the same problem. Im going to try replacing my sensor wire and go from there. All my solder connections look good. And my bullet connectors are in my battery firmly. I did loosen my belt a tad to reduce drag but problem is still there, it slmost sounds like my belt is skipping but its the motor. Maybe i will try loosening my slipper a bit to let it slip and the motor spool up.
Getting a little upset, kinda wishing i didnt start wondering away from my usual two classes, 2wd buggy and 4wd buggy
Hopefully it's not the speedo, but try the motor with a different speedo and see if it does the same thing. Obviously swap the sensor wire first, but it may be a bad sensor port on the speedo. And that would suck
Originally Posted by
lodhammerdin
Haha, probably since I keep getting "infractions" and week long bans for other people bumping my threads... Has happens twice this month alone.
If you keep getting infractions and week long bans...maybe ThunderbirdJunkie isn't the guy that should leave RCTech
