Originally Posted by
ktm11rider
Just took the shocks apart for the first time and tried to follow the associated video on how to build them emulsion style. When i take the bladder out of the shock i dont see any o ring in the cap like he says in the video. And sorry for the dumb question but if there is a bleederscrew hole why is there a little hole under it too. It leaks out of there. Not good with shocks only have built a couple before. Please fill me in
The emulsion orings were in the shock parts bag and go in in place of the bladders.
The little hole is for bleeding shocks with bladders. You can't bleed out the top hole because the bladder would block the fluid path and just balloon out.