Hey guy's, my son ran his for the first time last night. There were 5 other sc10 4x4's there. in each of the heat races, at least 3 had a rear whell fall off including my sons. Guys were cranking the wheel nuts so tight, that the rear drive was binding. Also, the cvd pins on the rear fall out when there's no wheel on! By the end of the night, 3 broke, my son was in a hurry to get the battery in his truck, reversed the battery leads and smoked his havoc pro! All the ae 4x4's finished at the bottom the losi's were WAY faster, and took the top 5 spots followed by a couple of durangos! Any solution besides drilling and tapping for a set screw to keep the cvd pins in?
tia.
I raced mine all day today with another SC10 4x4 neither of us had issues with pins or wheels falling off. Sounds like Installer error. I happened to pull the nut through my rear chassis plate as well, but I think I just tightened it to much when I put it together. Luckily my LHS had another rear chassis plate in stock and I changed it out in about 10 minutes