Originally Posted by
cherry2blost
Right ..... I am gonna post a download link for the entire folder, but it is not executable.
Here is what you need to do.
1) Navigate to program Files on your C drive
2)Make a copy of the Hobbywing USB 1.63 Folder
3)Then delete the original folder
4)Extract the contents of this RAR file to the program files folder
5)The new folder will replace the original one in its' entirety
6)Then your usual shortcuts etc will start up the newer version
It is easy and is a workaround until the new executable is available.
http://www.mediafire.com/?p37b3yu3vamnodr
NEW FOLDR RAR ^^^^
OK i tried the above and stuffed it up completely. I then started up my old version 1.62 as a back up and it automatically wanted to update me to the 211 software. Easy as pie...
Originally Posted by
tdunster
I had heard about the 518stock but never used it - so today i compared the 518stock with the 119Stock firmware.
Nothing too scientific here but hopefully it will be of some value to people.
Newcastle / Sugar Valley
Tamiya TB-03
Tamiya Kit Tyres
XeRun 60a / XeRun 17.5t
Intellect 2S 4000mah 20c
119 Stock
FDR 6.00:1
DDRS 9
#9 = 32
#10 = 18/0.1sec
#12 = 24
#13 = 3000rpm
#14 = 0.3sec
#15 = 250
Lap Time: 21.6sec
Newcastle / Sugar Valley
Tamiya TB-03
Tamiya Kit Tyres
XeRun 60a / XeRun 17.5t
Intellect 2S 4000mah 20c
518 Stock
FDR 6.00:1
DDRS 7
#9 = 21degrees
#12 = 8degrees
#13 = 3000rpm
#14 = 0.4sec
#15 = 300
Lap Time: 21.1sec
I can see what all the fuss is about now. The 518Stock just feels so much smoother than the 119stock.
However, I do think the 119stock has a lot more power / top end speed.
Your settings above for 119 have no where near the same amounts of boost and turbo as your 518 settings. What was the temps of those 2 runs as i would bet you could bump up the boost on the 119 and go quicker again.