Originally Posted by
Zerodefect
A 14 or 16 tooth pinion will work ok with the 4600 or 5700 maybe......You'll need a 3 or 4 tooth pinion for that 7700.
+1
The 7700 needs to be geared with the smallest pinion and the largest spur you can get and it still will not be enough for your application.
My main concern now is ensuring the Intellect 6000mah 2S 30C battery I'm running the LRP setup with won't overtly cause any damage.Cheers
Mark
Yes that lipo will work.
You may think your lipo is your only concern now but you will find out fast that the 7700 will not have the power you need. It's all RPM and no power.
The first thing you will see is your MMpro will run way to hot.
The first time you run it you'll think it's OK for maybe 3 or 4min. then it will shut down from to much heat.