R/C Tech Forums - View Single Post - Tekin Hotwire programming guide?
View Single Post
Old 12-24-2010 | 06:30 AM
  #8  
pakk's Avatar
pakk
Tech Elite
iTrader: (80)
 
Joined: Mar 2009
Posts: 3,082
Default

Originally Posted by Pulse_
And how am I supposed to realize what each setting is? Do I have to put a setting, run the car, stop, open the receiver, connect everything to a PC, change the same settings, try again to understand what it does? Every time, for each setting?

I'd rather know from the beginning on what the setting plays, put a value that looks ok for me and change the setting only if I'm not happy with it..
What settings do you not understand? I can try to answer them.

As far as throttle profile. There are 7. 5 are preset and 2 are custom. 1 being the least aggressive(no timing) and 5 being the most aggressive. When you go into the custom 1 and 2, you can fine tune the setting as you like. Also, when you save them, they will stay as is in that profile. So you can save your settings in profile 1 for a certain track then save settings in 2 for another track.

There is a nice brief walk through posted by Randy. I will see if I can find it.
pakk is offline