R/C Tech Forums - View Single Post - CRX nimh battery packs?
View Single Post
Old 04-16-2004 | 03:29 PM
  #2  
Tres's Avatar
Tres
Company Representative
iTrader: (14)
 
Joined: Oct 2001
Posts: 3,402
From: WWW.TNT-FX.COM
Default

The wall charger is NOT a peak type charger, it will charge the NiMH packs but can not tell when they have peaked.
Plus it charges at much lower rate.

You can charge AA's between .75 & 1 AMP with no problem.

Either the CG-335 Pro or CG-340.

I use the CG-335, it is a VERy versitile charger.



Applications: 4-24 cell 270-3000 mAh NiCd and Ni-MHbattery Packs
Input Voltage: 9 -13.8 volts DC
Min Input Amps: 10A min (10A needed for full functions)
Charge Rate:
Primary Port

NiCd 4-24 cells 0.5 - 5.5Amp

Secondary Port

NiCd 4 cell (4.8v) 250 mAh fixed


Glow Port

Single Cell 1.2v 1.1A

LCD Display
DC-DC Charging w/boost circuit
Delta Peak W/auto trickle
Delta Peak Cutoff(Primary and Glow ports only)
Initial Cut Off Error Override
Input/Output Polarity Protection
Tres is offline