R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 01-09-2010 | 02:06 PM
  #33124  
InspGadgt
Tech Champion
 
Joined: Nov 2001
Posts: 7,191
From: Hawaii, USA
Default
Originally Posted by Hyper_Mike
AWD,

For what it's worth, I've run both the Jaco Prism and the Parma Blackhawk back-to-back, same compounds, and had much better luck with the Blackhawks.

I ran 3 full race nights (that's 12 heats total) on the same pair of Blackhawks (Yellow Rear/Dbl Pink Front) with minimal chunking/peeling and then the first heat out with Jaco Prisms (Yellow Rear/Dbl Pink Front) the rears came back all chunked to crap !

I don't know if I just got lucky or if Parma uses a different gluing process than Jaco but I know a few others with similar experiences to mine with the Blackhawks.

Cheers,
Mike
My Blackhawks pealed just the same as my Jacos and had problems with the front bearings being loose. From my understanding Jaco makes the Blackhawks for Parma so the process would be the same.
InspGadgt is offline  
Reply