Below is my PHI 09 17.5 Stock set up from the Little Hampton S.A Titles and the VIC Interclub at Boronia

Shocks:
Front: Tamiya Shocks
17lb Corally – 3 Hole piston – 50 Weight Corally oil
Inner most hole on tower and outside on arm
Rear: Tamiya Shocks
14lb Corally – 3 Hole piston – 40 Weight Corally oil
2nd hole from inner on tower and middle on arm.

Ride Height:
Front: 5.5mm
Rear: 6mm

Silver sway bars on front and rear, spool front

Wheelbase:
Front: Short (both spacers in front)
Rear: Middle

Camber:
Front 1.5
Rear:1.5

Front and Rear Arm toe – Kit settings
2.0mm spacer under rear camber link (Hub side)
Camber links front and rear in the lowest inner holes.

100g of weight on outside of lipo packs
2 x 30g Corally weights in chassis slot locations.