Originally Posted by
XXXDad
Stick with the Drake set-up and make sure when you build your shocks you have full rebound! Set your droop to 95 mm in the front and make sure the A arm's are not bowed! The E conversion is the best on the market! Don't change a thing!
This is very good info. I like the Drake setup a lot so I would like to stick with it. I think my problem is that I do not fill the shocks to allow for full rebound. I usually set mine to rebound about 3/8" as instructed in the Nitro manual--maybe
that is my problem. I need to set the droop too and then worry about the ride height.