Originally Posted by Gizmatron

Mark does some crank work as well for the full stage 5 but that will cost you 125 bucks for the p/r/s as well as 120 bucks for the work so 245 total...I asked him what the stage 5 p/r/s would cost and he said 179 bucks plus postage..My crank pin is knackered..worn to a taper cause the crank was spinning at an angle as the bearing pushed out the bottom of the crankcase..I bet the new rod and pin I just fitted are ruined as well..certainly won't risk using them in anything else..so I am left with the MM5 p/r/s which I had ready in case I needed a replacement for my 7 port which was my main race motor..I should imagine the reworked sleeve will be fine with a standard crank..ask Mark to be sure..or you could always get him to just rework a crank..I don't know if crank pins can be repaired/replaced but I'm happy to include the crank at no extra cost if it can be fixed..