Originally Posted by
slaytanic
Guys, 3 failed bigboy pipes at the track this weekend. Same issue with the internal baffle breaking loose. I have one from the very fist units that Trinty got and it is fine. All the new ones seem too be breaking. This caused us absolute fits chasing a tune. Not realizing it was in the pipe. Keep an eye on it and save yourself a headache.
Ive had 2 fail, got one to try out, second time out it broke. Got the replacement, first time out it broke, the pipes are JUNK! not to mention the eb mods extech i have. Trinity, or ugh.. team epic will be getting one nasty letter from me along with all my broken trinity products
EDIT: I got around to uploading the pictures from my camera.(Note: this engine is the eb mods pre-run in motor and has 1 1/4 gallons on it)
Notice the taper on the crank pin
This is the amount of slop caused by it(my finger is holding it against the pin so its on the pin straight, no trick photography)
random picture of the block with eds engraving
somewhere i have a picture of the piston almost going through the top of the sleeve, ill have to find it.