Originally Posted by
light
Whats the best way to clean out the differentials when changing the silicone oil?
-=light=-
Originally Posted by
mrgsr
I use a small flat blade screw driver to crape most of it out then just use a rag to wipe it all clean. time consuming but pretty clean way of doing it
This way works great when you need to do it like at the track. Also, you can get a can of Nitro Clean after you have done this and blast away the rest of the fluid in the corners, but you can make a mess that way.
If you have more time, and are not in a rush, like at home, I take everything out and lay it out on a lint free towel overnight, put the case upside down and when you get to it the next day, its as clean as you can get it,