R/C Tech Forums - View Single Post - Loosing bind
Thread: Loosing bind
View Single Post
Old 02-19-2009 | 03:14 PM
  #8  
RCGaryK's Avatar
RCGaryK
Tech Champion
iTrader: (3)
 
Joined: Sep 2003
Posts: 7,331
From: Champaign, IL
Default

Originally Posted by eXraycer
Is that the same as the novak glitch buster?


I had a similar issue on my nomadio in my 1/8 brushless but i beleive I've eliminated it. It was far less frequent in mine so very hard to track down but mostly it happened during hard acceleration

I did 3 things and each had merit.

1. Increased the default failsafe time from .2s to .5s , it helped the symptoms but did not completely eliminate the occurances.
2. Installed the glitch buster.
3. Changed all my battery and esc connectors. (They were getting warm and were the most likely cause.)

IMO it was the battery connectors but the Glitch buster is good insurance if the problem develops again during a race.
Not familiar with the Glitch Buster so I don't know.
RCGaryK is offline