Originally Posted by
mugenb46
where is your HSN set now, if it's below flush move it back to flush, and let the motor breakin a little more, i leaned my HS about 2 hours but only after turning in the LS 3 turns. and had almost 1/2 a gallon on it when i moved the HS, then i turned it back 2, it was to much, not enough grip
Brian,
I left the needles as they were when you sent the motor back from break-in. The first tank screamed and had tons of smoke. After that the bog started. I tried turning the HSN needle one hour each way then the LSN an hour each way. It was close but still had bog. I ran a total of 8 tanks through it.
-John
I will run the engine again Sunday during race day. Where should I set my needles to start the day? Also, how many tanks should I try to get in during practice?