R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 01-21-2008 | 11:21 AM
  #1357  
grizz1's Avatar
grizz1
Tech Elite
 
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Default

I initially ran a JP-3 on my 5 Port and it was "ok", nothing startling. I changed to an 086 Dynamite after reading the posts here and what a difference. I would recommend the 086 for the 5 Port in a buggy and also in a truggy for most tracks. If you run a really tight track with good grip then use the Dynamite 053 on the 5 Port (truggy only), it's a real stump puller combination. If the track surface goes away you might need to tame the clutch a little or go back to the 086.
I believe the 2047 is great on the 5 Port also, but value for money the Dynamite pipes are hard to beat
grizz1 is offline