R/C Tech Forums - View Single Post - Tamiya TRF415
Thread: Tamiya TRF415
View Single Post
Old 02-20-2007 | 07:49 AM
  #17638  
Stein Tumert's Avatar
Stein Tumert
Tech Addict
 
Joined: Feb 2006
Posts: 560
From: Norway (Oslo) / Germany (Hamburg)
Default
Originally Posted by Burlap
I am running a standard MSX, and put the Evo V short arms on the car.

I noticed that if I followed the 1B-1A on the front, which people have mentioned in this thread, but notice that the drive is really bound up if I do that. When I run 1C-1A on the front, the drive is back to being smooth.

Anyone else notice any binding issues on the MSX with the short arms on the front end with the 1B-1A setup?

I have run the MRE with 1B-1A up front with the short arms (actually never ran the original arms) for quite some time...no binding...use 42 drive shafts (but have kept the 46 ones in the rear)

EDIT: Using the 415 MSX one-way (not the MRE one-way)
Last edited by Stein Tumert; 02-20-2007 at 02:49 PM.
Stein Tumert is offline  
Reply