Switch transmitter on >> Set transmiter throttle to neutral >> Connect

speed control to battery and switch speed control on >> Hold setup button

in for 3 seconds >> LED now flashes red/green to confirm it is in setup mode

>> Leavethrottle stick at neutral and press the setup button >> The neutral

setting is now stored, LED flashes green >> Move throttle to full and press

setup button while still holding full throttle >> Full throttle is now stored, LED

flashes red >> Move throttle to full brake and press setup button while still

holding full brake >> The brake is now stored, LED goes out.


I hope that is easy enough to read for you,goodluck