R/C Tech Forums - View Single Post - Tekno EB410.2 Thread
View Single Post
Old 03-30-2022 | 03:55 AM
  #392  
ldrinkwater2321
Tech Rookie
 
Joined: Mar 2022
Posts: 5
Default

Originally Posted by fat500
Hello, the low frequency springs will get you where you need to be right height wise. They provide a lot more grip but I only recommend them for clay tracks mostly outdoor. I could not comment on their use for carpet or Astro. I use the green front and the pink rear or the pink front and the pink rear with 30 or 27.5 in the front and 25 or 20 in the rear with the stock Pistons I race on an outdoor clay track with lots of big jumps in the car is very in the track and plush. I did put team Thornhill red bump stops in the rear to keep the chassis from slapping so hard if I don't land the jumps right and they work incredibly well.
In looking at the Low-Frequency Springs it looks like they are a thicker diameter wire and longer because they are for SCT. Unless I'm looking at the wrong springs PN# TKR6104, these are the fronts. Do I use these for the rear and the fronts then? Sorry, I'm a noob to all this stuff.
ldrinkwater2321 is offline