Originally Posted by
mike142
anyone else have the small screws that hold the battery tray to the chassis...stick out the bottom of the chassis a bit?
These are the TKR1341 M4x6mm screws that require threadlock. If i back them out enough to be flush with the chassis they are way loose....
They might stick out ever so slightly, perhaps .1mm at most. This is just due to the tolerances of the screws. Tighten them down and run it, any little part that sticks down will wear down pretty quickly. If you want you could also touch them with a dremel, shouldn't take more than a quick touch or two.