Originally Posted by
HollywoodRC
Ok, my Truggy Gurus......I am planning on running a Tekin RX8 with a 1350Kv motor on SMC 6V 4300mah. I always wanted to run 6V in my buggy but didn't because of ROAR. I do not plan on running ROAR with the Truggy. I hope this will be a good combination. What pinion do you guys recommend? The track I will be running , Thornhill, is the largest track in North America.
That is very uncommon setup. Most people run 4s with higher kv motors. It will be hard for anyone to give a good recommendation. Just have a good selection of pinions when you go to the track and keep an eye on temps. As long as the temp is below 180F you should be fine.