Originally Posted by
kostas xray
i have an intech br6 2.0.my car feels almost good the only problem i am having is that in off power the car spins out.when i approach a tight turn and let off the throtle the rear off the car spin like if you pull handbrake in 1:1 car.i am thinking to reduce antisquat but i dont know if that will help.any advice will be very helpfull.
diff oil 10-7-3
shocks 1.3 6hole front and rear.600cst front and 550cst rear
intech puprle springs front and rear
front droop full rear droop limit equal to front
front shocks inner hole in arm midlle down hole in tower
rear shocks outer down in tower outer hole in arm
roll center middle inner in tower front and rear.Rear camber link long in hub
ride height 27f 27r
hinge pin inserts RR 1.25(toe in) RF 0.5(down reduce anti squat) . FF 1.25(toe out) FR 0
camber angle stock
accerman midle hole
Some things I would try:
- get the same tires the fast guys are using just to rule tires out.
- forward brake bias ( remove some rear brake by adjusting the brake nut)
- Ackerman all the way forward
- front roll center inner lower on tower , rear inner center on tower.
- try 400-500 cst on shocks depending on ambient temperature,6x1.3 pistons
- rear shocks all the way in on tower
- remove some steering travel to make it less sensitive to steering input.