Originally Posted by
GluEEE
Okay.
So far I recognized 3 errlors:
a) TKR1333's hex can be really fast destroyed.
b) outter diff shimms are really hard or impossible to put. On one of my diffs I tried few hours (4?) to put it. Impossible. Now only one is in gearbox.
c) TKR1346 aren't 15mm. They are 16mm. And it's small problem.
That diff shimms are the biggest problem of all. And yes - I tried to cut small triangles. Still nope.
Yes, the TKR1333 can strip easily. I bought a bag to keep some on hand. For Christmas I got a Makita power screwdriver and some nice hex tip bits. That really helps keeping them from stripping. The hex recess in the screw is not very deep so if the hex tip of the tool wobbles at all (like when doing it by hand) the hex recess strips easily. Plus the screw is so long that the power tool makes life so much easier.
You may or may not need two diff shims. Only use as many as you need to get proper gear backlash
I haven't had a problem with TKR1346.