Originally Posted by
Cain
yeah, definitely was fun!
Alright, question for everyone, just saw the most recent posted setup using 6 x 1.5mm pistons here:
http://www.teknorc.com/tekno5/wp-con...MediumBite.pdf
is this a good setup to try on low bite, if not, what should be first place to start changing?
Cain, I'm Jeff Beck. I ran that setup again this weekend with a lower bite track and it still worked great. That setup was developed with help from Mr. Tekno himself. The key to the shock setup is using the outer upper holes in the arms to increase the shaft speed.
That setup is extremely aggressive. It has gratuitous amounts of steering. If you find it hard to drive start with lowering your dual rate and or moving the Ackerman position back to center to help tone it down.