Originally Posted by
Maximo
I believe your looking for a complex solution to a very basic problem..... By you just telling me it wont idle even with the idle screw turned all the way in tells me your needles are going to be completely out of range and the likely source of all your issues...Before we even consider looking at blocking the bypass we need to cover some of the basics..
what fuel are you running and what glowplug are you running ?
I've spent hours playing with those needles with the idle set at 1mm or so. Even got a hold of redcat for resetting the needles and the thing still won't run at factory reset settings. Thing will be running great and acting like it should then out of no where just starts acting up. I am using 20% nitro regular old torco fuel and a medium glow plug