Originally Posted by
Boss Ross
Thinking about my .2 build, and curious if the crowd has any input on pairing the HW SCT-Pro with one of their 1/8 scale motors. It seems the 150A is big and requires some mods to fit. My .1 has an RX8 and the 2050 which has been rock solid, but not sure I want to drop the coin to go Gen 2 as the HW setup in my SCT410 has been really impressive. TIA.
Been running the HW SCT-Pro and a HW 1800kv in my .1 and its great. The SCT-Pro is basically the same footprint as the RX8 so it fits easily and the 1800kv has great bottom end and is smooth. Run in Texas heat (17/44) and the hottest the ESC has gotten is 165 and the motor is 180.