R/C Tech Forums - View Single Post - Team Associated B4.2 Thread
Thread: Team Associated B4.2 Thread
View Single Post
Old 08-13-2013 | 04:39 PM
  #8112  
Wildcat1971's Avatar
Wildcat1971
Tech Prophet
iTrader: (84)
 
Joined: Apr 2012
Posts: 17,389
From: Arizona
Default
Originally Posted by Jsaves
Wildcat1971,

What set up are you using? I run on an out door drying loose track. It has a hard pan underneath and a loose silt on top.
I am running the following set up.

Tires - m3 hole shot fronts, green goose bumps rear & stock foam on both.

Front :
Shocks - Green spring, 2 x 1.6 flat, 30 wt, 1 tower, O arm
tie rod - 1 in (2mm washer) and A out 30 deg. caster
Rear:
Shocks - White spring, 2x 1.6 flat, 27.5 wt., 1 tower, I arm
tie rod - 1 in (2mm washer) and B out, 0 deg. hub
This Steven Hartson set up

The buggy is loose on power
Thanks for any help
God Bless
IMO, white is too stiff in the rear, I would go green. I really dont like the 1.6 pistons much at all. My personal favorites are the 1.4x3 pistons. If they are too pricey for you, try the 1.7's with 37.5/32.5 oils.
Wildcat1971 is offline  
Reply