Originally Posted by BiggieFries

There is nothing to clear. It doesn't save any data. I try to clear it before I run it and it still has no data after I bring it back in.

It's not a powering the Hotwire issue, it's a connection into the fan port issue. If you gently wiggle the Hotwire adapter at the fan port you can see the rx8 LEDs turn on and off.

Scte 2.0
Gforce 2s 6000mah 70c
4mm bullets
Pro4hd 4300
14/40
72% current limit
6.8v cutoff
Neutral width 5
Min throttle 1
Stock timing (10*)
Brakes 100% (40% on tx)
No drag brake
Everything else stock