Hi Guys, getting some hot temps on motors in my FT Sc104x4.. tried a 550 5.0t 13t pinion on to 62t spur motor was 60~70deg Celsius and batteries getting warm, and a 540 4pole 4800kv at 12t on to 62t spur 80~90deg Celsiu batts warm. Someone told me the 4 pole i had way "under geared" and suggested I go up to 14t to get the heat down.. (does not sound right to me, i'm afraid something is going to melt!) Are there any common things to check in the drive train that might be causing friction etc before I pull down the whole car?

2nd question, changing to soft springs (loose wet track) which would be the best sway bar to drop in front and rear?

Thanks!!