that the setup i posted for him PNB 2013!!! it almost what i run but/// i have non ft stock shock piston/emulsion/ blue spring rear/1.5 anti roll rear/front washer is like 2.5mm inside only and rear is around 5mm ( i run the rear link full all the way long in and out hole)and i dont run the carbon part to raised the ballstud(i tryed it but i like the tire to roll on the edge a little). my diff is 10k front 5k back( i lower the oil it help the rear not to rotate as much off power + i run around 120grm front haft of the truck(outside the chassis to about the middle) and exotek locked front clutch so i dont need heaver oil for grip). also i only run +3 wheels in the front

Cherry (try this setup if you have a spare truck) on you track and tell me how it hold up(i just want some input on this setup)... the only thing i wish i they made a harder spring for front i think my next order will be ofna 14mm spring front for the hyper 9 medium or firm. i have the soft and there like the same as associate yellow(slightly softer and taller you haft to run the shock collar to the top).