Originally Posted by chevmaro

Keep in mind I just need a subtle change. The car is really good. I race on medium/high bite clay indoors. I like to run Gold Barcodes front and rear. Closed cell or open depending on the day. Just pushing a teeny bit on exit. Every time I make a change its just too far and I cant square up on exit. Thanks for the help.

Front
Shocks: 1/0
Link: 1A
Washers 1 blue 1mm washer 1 silver .030
Ride: 24mm
Bump: 2mm
Caster: 30
Springs: Black
Oil: 32.5 2x1.6
Camber: 1
Limiter: 3

Rear
Shocks: 1/0
Springs: Green
Oil: 30 2x1.6
Link: 1/B, A HUBS
Washers: 0
Wheelbase: Middle
Toe: 3
Squat: 2
Camber: 1
Limiter: 2
Ride: 24

B44 rear arms, ballast weight. Shorty pack all the way forward. No other weight added. Run in stock buggy with 69 spur.