Originally Posted by
patrick lsp
first time out with new kit. just a practice day on small track, i love it. turns, jumps, excellerates like a rocket. box stock setup. manual say for more steering try 7 5 2 in diffs. does this give more turn in? on a side note, when i tighten down steering top plate it binds steering.
also can someone tell me what servo horn and where to get? i am in Pa. prefer somewhere besides amain or tekno that is on opposite coast.
lastly not much brakes. i run rx8 and 2050.i have gone thru manual tuning on rx8 but still not what i want, travel is set to 150% last time out on durango dex408 i had to dial brakes out of setup. same motor and rx8.
i had a very high speed abrupt stop with all impact to front today with zero damage. i thought for sure i was going to pick up peices.
thanks for any help to new eb48 owner.
I bought the hot bodies servo horn from rpphobbies. For the top plate issue make sure everything is seated completely and that the bearings are in fact inside the plastic portion and that the plastic portion isn't on top of the bottom bearing. For the brakes, I have no idea. I run 70% brakes in the ESC and I also turn the radio down to 70% and it will still lock them up. Is it an old motor?
If you read back a page or so you'll see a list of horns that work but IMO the hot bodies is the only direct universal replacement.