Originally Posted by
JCc4str0
Sir ilang mm ang pwede ilagay sa shocks ng tamiya cc01, naka 1.9 na tires yung akin, sumasayad kase sa body yung gulong, stock shocks po gamit ko ngayon.
On a stock setup, you're a bit limited only to your stock shocks. If you do the front suspension lift mod, you can probably fit around 80mm shocks without having to drill out holes in the fender wells. The rear can take around the same size of shocks without doing any mods. What tires are you using now? Yung body ba is still the FJ40?
Originally Posted by
pinoy_rc
mga sirs,
san po makakabili ng corrosionX for waterproofing purposes? nasa malls ba ito?
or any by-product common for waterproofing ng electronix.
Look for CebuRC's posts on the buy/sell thread, he sells corrosionx.
Originally Posted by
djoverdose
Jimuni.ss,
Have 2 spare servo. Will take alook at it...
Also would like to ask what setup do you guys run on your wraith? Just finished building mine. Placed a brushless motor on it. with the stock axial rx and tx and stock gearing. Hirap macontrol ang crawl niya. Also using a HW 60a Esc with drag brake. Parang pag mabagal nanginginig yung takbo niya. Di siya smooth?
Is your brushless system sensored? If not, that's the reason why your rig is "cogging". Sensorless motors aren't smooth on low speeds.
BY THE WAY....ANY OF YOU GUYS HAVE A SPARE Y LINK? KAHIT USED?
