Originally Posted by
Wildcat1971
@snaf grey rear springs seems way off. Green rear is the normal config on all surfaces. You didnt list your limiter or shock piston info. I use Ryan Cav's shock setup from nats. Not his springs though. This last weekend I ran losi BB green fronts and losi BB yellow rear springs. I used the same camber link positions as you but I went 3 ball stud shims in the front and 1 in the rear. I was actually having issues getting my rear to break loose. I was running HB Beams in pink compound front and rear on an indoor dry clay track. medium bite.
I had Greens on the rear to start with on Saturday. They weren't working so I went with what a fellow racer had which was the grays. Those also didn't work. But switching to the ProLine M3 slicks did it on Saturday when the track was dry. I have the #2 pistons in both front and rear, just checked. And I have 2 limiters in each. Now that it's drying out, I'm lost. I'm hoping the track will be back to wet after the config change.