R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 09-01-2012 | 11:13 AM
  #19726  
Wildcat1971's Avatar
Wildcat1971
Tech Prophet
iTrader: (84)
 
Joined: Apr 2012
Posts: 17,389
From: Arizona
Default
Originally Posted by jdeadman
+1 on the dremel I have also used Ca glue on the tip of the screw driver. let it set for a few moments then undo the screw to get the screw off just heat up the screw with a torch and the CA comes off

Also I have found some 5/64 hex screws in the 4-40 thread in my old screw pile. Don't know where they came from but never have a problem.
I would try the ca thing. I still have wheels with axles attached in my shop because the dremal idea didnt work.
Wildcat1971 is offline  
Reply