We have to use rubber here in Australia, these are the combo's I've come across that should work for the F104 v2;
ALL Shimizu Racing tires for F104, but either Tamiya RIMS or TRG Rims.
The TRG rims are for foam, so you have to drill a hole and then glue them on.
You have to remove some ribbing from Tamiya RIMS to get these tires to fit as well.
Check out the F104 Pro thread on method for this mod to Tamiya RIMS (it's the first post):
http://www.rctech.net/forum/electric...ber-tires.html
FRONT
PS-0571
F104 racing slick tire front (soft)
RIM Choices;
Tamiya 51398 or 54201
TRG 5079 or 5080
FRONT
PS-0573
F104 racing slick tire front (medium)
RIM Choices;
Tamiya 51398 or 54201
TRG 5079 or 5080
FRONT
PS-0574
F104 racing slick tire front (F3 - Soft)
RIM Choices;
Tamiya 51398 or 54201
TRG 5079 or 5080
FRONT
PS-0577
F104 racing slick tire (F3)
RIM Choices;
Tamiya 51398 or 54201
TRG 5079 or 5080
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
REAR
PS-0575
F104 racing slick rear tire (R1)
RIM Choices;
Tamiya 51398 or 54201
TRG 5081 or 5082
REAR
PS-0578
F104 racing slick tire (R3)
RIM Choices;
Tamiya 51398 or 54201
TRG 5081 or 5082
Any others tried and tested for F104 v2?
Surfaces: Asphalt, concrete etc - no carpet.