R/C Tech Forums - View Single Post - Brushless Converted T-Maxx
View Single Post
Old 06-15-2012 | 06:54 AM
  #119  
92lilredyj
Tech Apprentice
 
Joined: Dec 2010
Posts: 82
From: Beaumont, tx
Default

Originally Posted by vanquisher
Got the battery tray in, plugged in the 3S 5000 lipo, squeezed the trigger and yeah. What a dog. Hooked up the Castlelink and set the punch control to 0. Got the bottom end back, but damn, this thing has no top end with the 72/18 combo. The fact that it's heavy is not helping, but I was expecting more out of it, even only on a 3S 30C pack. I wonder what the tranny and diff gear ratios are? I guess I will be going up on pinion size to try find some top end.

You really should go up to at least a 4s battery. I run 4s and 20/65 gearing. On 3s I run 20/58. That gives good speed. With your combo you could go 22/58 and be ok on heat on 3s.

2200kv is a low KV when going though a tranny and axles so you have to gear up ALOT to comp.
92lilredyj is offline