R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 05-29-2012 | 08:00 PM
  #15250  
ray_munday's Avatar
ray_munday
Tech Elite
iTrader: (4)
 
Joined: Apr 2006
Posts: 2,823
From: Melbourne, Australia
Default

Originally Posted by phillips
Stopped using them?

What about the arms?
Tha carbon arms are used in high grip / high temp conditions, but plastic arms are used most of the time. If you look at the setup sheets on r10.com you can get an idea of when the team have been using them.

Originally Posted by elex300
Hey guys, I got all my stuff to put the Losi BB's on. Now I live an hour away from my regular track so I dont get much test and tune time and I have 2 big races there this weekend. My buggy was dialed last weekend with green rears and brown fronts using losi 30wf 27.5wr. I run a full stick pack on a +8 chassis. Should I be running yellow rears and orange fronts? I have white rears and red fronts to.
if you liked the brown / green setup, start with orange / white. Based on measuring actual spring rate, these are the closest and I found give a simialr handling balance but ride the bumps better.

Ray
ray_munday is offline