Originally Posted by
Nilks
Hi,
I hope anyone can help me here. I am using a GT2.0 Pro together with an LRP X12 17.5T running blinky. The motor is timed with 4-dot insert and geared at 4.0. Good speed and low temps.
The problem I have is with the brakes. I have calibrated everything and brakes are turned up to 100% in both speedo and transmitter. I almost have no brakes at all. I know that such a tall gearing will have less braking, but the Tekin speedo has a lot more brakes with the same setup!
Anyone that can help?
So I tried all the suggestions this weekend. By setting reverse force (#6) at 100%, og calibrating with brake set on 100 on the transmitter, and then bumping it to 160, helped a bit. But no where near enough for our track.
On our small and twisty track, we need to tap the brakes hard before going into the corner, and the Speed Passion GT2.0 Pro doesn't have enough brakes for that. Atleast not in 17.5T blinky, running a LRP X12 geared at 4.0 with 4-dot timing insert.