R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 03-01-2012 | 05:35 PM
  #18503  
SCTDan's Avatar
SCTDan
Tech Regular
iTrader: (9)
 
Joined: Aug 2011
Posts: 435
From: Ojai, CA
Lightbulb

Originally Posted by SCTDan
Couple of changes to my truck.


the front skid plate is steel and weighs 4.5 oz. Allowed me to take the lead out from in front of the battery and gain a little more front weight bias. The extensions on the rear hubs raise the link 6mm. May have to shim the inner ball stud a little. I'll see after running it
Ran 3 packs before work today. Moving the weight forward and to the bottom of the chassis improved on power steering and jumping (5k diff fluid fr and rear) Didn't like the hub extensions. Tried raising the inside ball stud but ended up back with no extension inner most position for both ball studs. The rear end just didn't seem planted. Changed the rear shock oil to 25wt. It seems to worker even better with the heaver springs. Can't race until the 18th lots more practice with NO cheese until then. Maybe the diff upgrade will be available before then???????
SCTDan is offline