R/C Tech Forums - View Single Post - Serpent 811E Buggy Thread
View Single Post
Old 02-07-2012 | 03:22 PM
  #1412  
400units
Tech Adept
iTrader: (2)
 
Joined: Apr 2010
Posts: 201
From: San Antonio, TX
Default

Originally Posted by dtr
Hi,

Could somebody please post a four-scale weight distribution measurement? This is the nicest buggy I've seen, but I'm still afraid of how hard it is to balance the motor weight.
If I had four scales, I would do it for you as I am currious exactly how balanced it is myself. I know on my Xray, it needs 2oz of extra weight to properly balance it with the various equipment I have in it. However, since every battery, motor, and esc manufacturer has different sizes and weight, every car is a little different. But i will tell you that this buggy is extremely well built and is extremely stable both in the air, around corners, and rough areas of the track. If the buggy was not properly balanced it would not handle as well as it does. Remember that this buggy isn't like the others that have one large battery on the right rear and then the motor on the front left. Your balance if far better with 2 split batteries on both sides of the chassis, not to mention a lower center of gravity. Even the new Sworks saw the wisdom of using 2 batteries, however they decided to stand the batteries on their sides. Seems like they would have a higher center of gravity and be more prone to flipping over in the corners. Anyway, I would highly recommend picking the new serpent up. You won't be disapointed.
400units is offline