R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 12-31-2011 | 01:06 AM
  #9076  
ray_munday's Avatar
ray_munday
Tech Elite
iTrader: (4)
 
Joined: Apr 2006
Posts: 2,823
From: Melbourne, Australia
Default
Originally Posted by Rotax125
Same.. If i run a silver spring with the weight of my buggy it sits at 27-28mm..With the greens it sits at 24mm.. If i need to run the silver springs i go to the out side hole on the rear tower and i get back to 24mm in the rear..
Replace the B4.1 lower spring cups with the older B4 spring cups (less offset) at the rear - lets you run a lower ride height if you need to.
ray_munday is offline  
Reply