R/C Tech Forums - Zero timing esc's

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Zero timing esc's (https://www.rctech.net/forum/radio-electronics/988035-zero-timing-escs.html)

Quote:

Originally Posted by howardcano (Post 14934161)

The Tekin product page states that the Spec is always in non-timing mode, as stated by yzracer758. But the link to the manual is for the regular GenII, which does have adjustable timing. I don't know if the link is incorrect, or that there simply is no separate manual for the Spec version.

I see now, it is the same manual. Thank you for setting me straight.

Quote:

Originally Posted by howardcano (Post 14934161)

Just an update on this thread. The Tekin Gen 2 RS Spec manual that comes with the esc is different than the online one. It states below the shown profiles for timing that the RS Spec does not allow for any of these to be used. The Hotwire software when connected to the esc shows a blank page for the timing adjustments and I believe it states on that page that the unit cannot have any timing profiles.
Very nice esc.

There is a zero timing black box:
https://www.amainhobbies.com/reedy-b...c27002/p478558

No adjustable timing.

Quote:

Originally Posted by Roelof (Post 14971744)

There is a zero timing black box:
https://www.amainhobbies.com/reedy-b...c27002/p478558

No adjustable timing.

It was listed in an earlier post.